> For the complete documentation index, see [llms.txt](https://docs.rome.builders/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.rome.builders/ja/canton-zk-evm/prover-host.md).

# Ostia prover ホスト

プローバーのホスト要件、永続ワーカー、固定されたゲストビルド。

prover は、GPU ワーカー 1 台で ZisK を実行します。コーディネーターとワーカーはリクエストの合間も稼働し続け、PLONK キーはあらかじめ読み込まれています。各ブロックについて、builder は入力を送信し、ラップ済み証明を受け取ります。

Ostia DevNet では、prover は常駐するコーディネーターとワーカーとして動作し、次のものにサービスを提供します。 [継続稼働する builder](https://docs.rome.builders/ja/canton-zk-evm/run-it-locally.md#run-the-builder-continuously)。DevNet の prover は、48 vCPU のマシン上で動作する NVIDIA RTX PRO 6000 Blackwell Server Edition（96 GB）1 台です。これは、以下で説明する 2026-10-03 のベンチマークで使用したものと同種のマシンです。

このページでは、リリース `v0.1.0`について説明します。詳しくは [prover の README](https://github.com/rome-protocol/canton-zk-evm/blob/v0.1.0/prover/README.md) と [測定結果](https://github.com/rome-protocol/canton-zk-evm/blob/v0.1.0/docs/METRICS.md).

## ホスト要件

インストーラーの対象は、 `apt`, `sudo`、NVIDIA ドライバーがインストール済みで、約 100 GB の空きディスク容量がある Linux x86-64 環境です。システムパッケージをインストールし、メモリロックの制限を変更します。

2026-10-03 のベンチマークでは、GPU メモリ 96 GB の NVIDIA RTX PRO 6000 Blackwell Server Edition 1 台、AMD EPYC 9B45 上の 48 vCPU、ホスト RAM 176 GiB を使用しました。Ubuntu 22.04.5 とドライバー 580.178.04 で実行しました。これらの仕様はテスト対象マシンについて記述したものであり、prover の実行に必要な最小ハードウェアを示すものではありません。

ベンチマークでは、エミュレーターの共有メモリとして 22.9 GiB が記録されました。PLONK wrap 単体で報告された GPU 要件は 30,054,767,337 バイト（約 28.0 GiB）でした。GPU メモリ使用量のピークは 93.2 GiB でしたが、prover はカード上に大きなバッファーを確保します。このピークはバッファーの割り当てを反映したものであり、prover 全体に最低限必要な GPU メモリ量を示すものではありません。それぞれの数値の範囲については、 [測定結果](https://docs.rome.builders/ja/canton-zk-evm/measurements.md) を参照してください。

## ビルドと実行

リリース v0.1.0 では ZisK 1.3.1-alpha が固定されています。DevNet の prover は ZisK 1.4.0-alpha（[main 上の PINS](https://github.com/rome-protocol/canton-zk-evm/blob/main/PINS)）、Node 20.20.2、snarkjs 0.7.6 を使用します。explorer の Node バージョンは別です。

| スクリプト                   | 内容                                                           |
| ----------------------- | ------------------------------------------------------------ |
| `prover/install.sh`     | インストーラーの固定チェックサムを確認してから、GPU ビルド、証明鍵、PLONK のセットアップをインストールします。 |
| `prover/build-guest.sh` | ゲスト ELF をビルドし、その SHA-256、programVK、rootC、ルールハッシュを出力します。      |
| `prover/start.sh`       | PLONK キーを読み込んだ状態で、コーディネーターと GPU ワーカー 1 台を起動します。              |
| `prover/make-input.sh`  | 保存済みのブロック、実行 witness、genesis から prover の入力を作成します。            |
| `prover/prove-one.sh`   | 入力 1 件の証明を生成し、証明を `cargo-zisk`で検証して、ラップ済み証明を 16 進数形式で書き込みます。 |

`ZISK_COORDINATOR_URL` でコーディネーターを指定します。デフォルトは同じマシン上のコーディネーターです。 `network/up.sh` はゲストをビルドし、ローカルネットワークの一部として prover を起動します。この手順については、 [Ostia を独自に実行する](https://docs.rome.builders/ja/canton-zk-evm/run-it-locally.md) を参照してください。

builder はデフォルトで、 `prover/prove-one.sh` を `CZE_PROVE_CMD`経由で実行します。このコマンドは入力ファイルと出力フォルダーを受け取り、 `wrapped-proof.hex`を出力する必要があります。そのローカル `cargo-zisk` check は、チェーンで固定された programVK と rootC を強制しません。これらの固定値は、確認者側のサイドカーで強制されます。詳しくは [ビルダー設定](https://github.com/rome-protocol/canton-zk-evm/blob/v0.1.0/builder/README.md#settings).

## ゲストキーを再現する

ビルドスクリプトは固定のビルドフォルダーを1つ使用し、ビルドパスが残っている ELF を拒否します。ビルドごとにこの共有フォルダーが空になるため、ゲストのビルドは一度に1つだけ実行してください。

2026-10-04、同じユーザーが同じマシン上で新規チェックアウトを2つ順にビルドしたところ、同一の ELF と programVK が生成されました。ビルド時間はそれぞれ133秒と126秒でした。別のユーザーまたは別のマシンでビルドを再現する場合は、生成された programVK が記録済みの値と一致することを確認してください。 `network/up.sh` ビルドの固定値が異なる場合は停止します。 [ゲストの README](https://github.com/rome-protocol/canton-zk-evm/blob/v0.1.0/guest/README.md#building) では、ビルド方法とその制限について説明しています。

## 証明の出力

ワイヤ形式は1,344バイトです。PLONK証明が768バイト、programVK が32バイト、rootC が32バイト、公開値が512バイトです。 `prove-one.sh` は、16進数形式と、次のコマンドで生成される JSON を書き出します。 `cargo-zisk-dev export-solidity-calldata`.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.rome.builders/ja/canton-zk-evm/prover-host.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
