> For the complete documentation index, see [llms.txt](https://docs.rome.builders/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.rome.builders/ja/canton-zk-evm/use-cases.md).

# ユースケース

各ユースケースの背後にある要素を使って、Ostia DevNet上または自分で用意したネットワーク上で今日できることと、それを自力でできるかどうか。

以下の各ユースケースには、現時点で外部の人ができることを示しています。

* **今すぐDevNetで実行できます。** ブラウザーウォレットまたはパブリックRPCを使って、自分で実行できます。
* **DevNet上のRome運営デモ。** DevNet上で実行されていますが、参加者と会場はRomeが運営しています。現時点では、そこで自分で実行することはできません。
* **自分のネットワーク上で実行できます。** 自分でOstiaを実行すれば利用できます。

それぞれ、使用する構成要素を示しています。 [Cantonで構築する](https://docs.rome.builders/ja/canton-zk-evm/build-with-canton.md) には、各構成要素の詳細が記載されています。

**現時点で信頼する相手。** proverと唯一の確認参加者をRomeが運営しています。Romeの参加者がCanton Coinのカストディとtwin adminを担っています。コードとZisK（アルファ版）は監査を受けていません。これはDevNet限定です。詳しくは [信頼モデルと制限事項](https://docs.rome.builders/ja/canton-zk-evm/trust-model.md).

**まだできないことをリクエストするには**、自分のERC-20のtwinなどについて、 [リポジトリ](https://github.com/rome-protocol/canton-zk-evm/issues) にissueを作成するか、Romeの [Discord](https://discord.gg/vZ9rnCdNSB)で問い合わせてください。Romeが個別に判断し、実施時期は約束されていません。

## CantonにコミットするチェーンにSolidityアプリをデプロイする

今すぐDevNetで実行できます。構成要素：パブリックRPC、FoundryまたはHardhat、エクスプローラーでのコントラクト検証。

Ethereumと同じ方法でコントラクトをデプロイし、ソースコードを検証して、各ブロックをCantonの記録と並べて確認できます。ERC-20、ERC-721、ERC-1155、ERC-3643の許可型トークン、Uniswap V2、およびTACEO Mercesの証明を検証するコントラクトはすべてOstia上で稼働しており、RedStoneの価格コンシューマーもデプロイされ、検証済みです。これらは自分で実行できます。詳しくは [Ostiaで構築する](https://docs.rome.builders/ja/canton-zk-evm/build-on-ostia.md).

## EVMコントラクトでCanton Coinを使う

DevNet上のRome運営デモ。Cantonウォレットの接続機能が有効になれば、自分で実行できます。構成要素：CC ERC-20、ゲートウェイ、Bridgeページ。

BridgeページでCanton Coinを預け入れると、10桁の小数を持つERC-20のCCとしてOstiaに届き、あらゆるコントラクトで保有・転送できます。引き出すと、Canton CoinがCantonウォレットに戻ります。詳しくは [Bridge](https://docs.rome.builders/ja/canton-zk-evm/bridge.md).

## EVMトークンをtwinとしてCantonに置く

WtROMEとTKAを使ったDevNet上のRome運営デモ。新しいトークンはRomeが運営します。構成要素：vault、ERC-20 twin、twin registry service。

ERC-20をvaultに支払うと、CantonのパーティがそのtwinであるCIP-0056トークンを保有します。twinを償還すると、ERC-20が戻ります。DevNetにはTKAとWtROMEのtwinがあります。新しいtwinの登録はRomeが行います。申請方法については、このページ上部の注記をご覧ください。

現時点でtwinを保有しているのは、Romeが運営するパーティだけです。ウォレットのパーティをホストするバリデーターが、まずtwinパッケージを保有する必要があるため、外部のCantonウォレットではまだ保有も送信もできません。詳しくは [Cantonで構築する](https://docs.rome.builders/ja/canton-zk-evm/build-with-canton.md#erc-20-twins-on-canton).

## ERC-20でCantonのアロケーションを支払う

DevNet上のRome運営デモ。構成要素：ゲートウェイの `pay`, `DvpTerms`.

ゲートウェイ経由のERC-20支払いは、その支払いを含むブロックと同じCantonトランザクション内でCantonのアロケーションを実行します。これはDevNetのブロック783と1471で実行されました。現時点ではRomeがテスト用パーティで運営しています。自分のパーティ間で実行するには、自分のネットワークを運用してください。

## CantonトークンをERC-20と交換する

DevNet上のRome運営デモ。構成要素： `otc-venue` Damlアプリ、チェーンの `VenueTrade` と `FundedClaim`、ゲートウェイ。

売り手が買い手のERC-20と引き換えにCantonトークンを提示し、会場が取引を実行します。売り手のアロケーションは、買い手の支払いと同じCantonトランザクション内で実行されます。DevNetでは2026-10-27に、TKBとTKAの取引がブロック16816で実行されました。エクスプローラーでは [`/swaps`](https://ostia.devnet.romeprotocol.xyz/swaps)で確認できます。DevNet上の会場はRomeが運営しており、そこでの実行は1回のみです。自分で会場を運営するには、自分のネットワークを運用してください。

## 自分のチェーンに対してCantonアプリをテストする

自分のネットワーク上で実行できます。構成要素：ローカルCantonネットワーク、デモ、エクスプローラー。

[自分専用のOstiaを実行する](https://docs.rome.builders/ja/canton-zk-evm/run-it-locally.md) これにより、自分の参加者でマシン上にスタックが起動します。Romeを介さずに、入金、支払い、出金、取引所での取引を行えます。

## 決済済みの内容を読み取り、確認する

今すぐDevNetで試しましょう。使用するのは、エクスプローラーのAPIとブラウザー内での証明チェックです。

キー不要のエクスプローラーAPIを使って、ブロック、legs、twins、swapsを読み取ります（`/api/legs`, `/api/twins`, `/api/swaps`）。Verifyボタンを使えば、ブラウザーで任意のブロックの証明を確認できます。詳しくは [エクスプローラー](https://docs.rome.builders/ja/canton-zk-evm/explorer.md).


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.rome.builders/ja/canton-zk-evm/use-cases.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
