> For the complete documentation index, see [llms.txt](https://docs.rome.builders/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.rome.builders/ko/canton-zk-evm/prover-host.md).

# Ostia prover 호스트

증명기의 호스트 요구사항, 지속형 워커, 그리고 고정된 게스트 빌드.

증명기는 하나의 GPU 워커로 ZisK를 실행합니다. 코디네이터와 워커는 요청이 없는 동안에도 계속 실행되며, PLONK 키가 이미 로드되어 있습니다. 각 블록에 대해 빌더는 입력을 보내고 래핑된 증명을 받습니다.

Ostia DevNet에서 증명기는 다음을 지원하는 상시 실행 코디네이터와 워커로 동작합니다. [상시 실행 빌더](https://docs.rome.builders/ko/canton-zk-evm/run-it-locally.md#run-the-builder-continuously). DevNet 증명기는 48-vCPU 머신에 탑재된 NVIDIA RTX PRO 6000 Blackwell Server Edition(96 GB) 한 대에서 실행됩니다. 아래에 설명된 2026-10-03 벤치마크와 같은 종류의 머신입니다.

이 페이지에서는 릴리스 `v0.1.0`에 대해 설명합니다. 전체 내용을 보려면 [증명기 README](https://github.com/rome-protocol/canton-zk-evm/blob/v0.1.0/prover/README.md) 와 [측정 결과](https://github.com/rome-protocol/canton-zk-evm/blob/v0.1.0/docs/METRICS.md).

## 호스트 요구 사항

설치 프로그램은 `apt`, `sudo`를 사용할 수 있고 NVIDIA 드라이버가 설치된 Linux x86-64 시스템을 대상으로 하며, 디스크 여유 공간은 약 100 GB가 필요합니다. 시스템 패키지를 설치하고 메모리 잠금 한도를 변경합니다.

2026-10-03 벤치마크에서는 GPU 메모리 96 GB의 NVIDIA RTX PRO 6000 Blackwell Server Edition 한 대와 AMD EPYC 9B45 기반 48 vCPU, 호스트 RAM 176 GiB를 사용했습니다. 드라이버 580.178.04가 설치된 Ubuntu 22.04.5에서 실행했습니다. 이 사양은 테스트한 머신의 사양이며, 증명기 실행에 필요한 최소 하드웨어를 의미하지는 않습니다.

벤치마크에서 에뮬레이터의 공유 메모리는 22.9 GiB로 측정되었습니다. PLONK 래핑 작업만으로도 GPU 요구량이 30,054,767,337바이트(약 28.0 GiB)라고 보고되었습니다. GPU 메모리 사용량은 최대 93.2 GiB였지만, 증명기는 카드 메모리의 큰 버퍼를 할당합니다. 이 최대치는 버퍼 할당량을 반영하며, 증명기 전체에 필요한 최소 GPU 메모리 용량을 나타내지는 않습니다. 각 수치의 범위는 [측정 결과](https://docs.rome.builders/ko/canton-zk-evm/measurements.md) 를 참고하세요.

## 빌드 및 실행

릴리스 v0.1.0은 ZisK 1.3.1-alpha를 고정 버전으로 사용합니다. DevNet 증명기는 ZisK 1.4.0-alpha([main의 PINS](https://github.com/rome-protocol/canton-zk-evm/blob/main/PINS)), Node 20.20.2 및 snarkjs 0.7.6을 사용합니다. 익스플로러의 Node 버전은 별개입니다.

| 스크립트                    | 기능                                                         |
| ----------------------- | ---------------------------------------------------------- |
| `prover/install.sh`     | 설치 프로그램의 고정 체크섬을 확인한 다음 GPU 빌드, 증명 키 및 PLONK 설정을 설치합니다.    |
| `prover/build-guest.sh` | 게스트 ELF를 빌드하고 SHA-256, programVK, rootC 및 rules 해시를 출력합니다. |
| `prover/start.sh`       | PLONK 키를 로드한 상태로 코디네이터와 GPU 워커 하나를 시작합니다.                  |
| `prover/make-input.sh`  | 저장된 블록, 실행 증인 및 제네시스로 증명기 입력을 생성합니다.                       |
| `prover/prove-one.sh`   | 입력 하나를 증명하고, `cargo-zisk`로 증명을 확인한 다음 래핑된 증명을 16진수로 기록합니다. |

`ZISK_COORDINATOR_URL` 은 코디네이터를 지정합니다. 기본값은 같은 머신에 있는 코디네이터입니다. `network/up.sh` 게스트를 빌드하고 로컬 네트워크의 일부로 증명기를 시작합니다. 해당 절차는 [Ostia 자체 실행하기](https://docs.rome.builders/ko/canton-zk-evm/run-it-locally.md) 를 참고하세요.

빌더는 기본적으로 `prover/prove-one.sh` 를 `CZE_PROVE_CMD`를 통해 실행합니다. 이 명령은 입력 파일과 출력 폴더를 전달받으며, `wrapped-proof.hex`를 생성해야 합니다. 로컬 설정 `cargo-zisk` 검사는 체인에 고정된 programVK와 rootC를 확인하지 않습니다. 확인자 측의 사이드카가 이러한 고정값을 확인합니다. 자세한 내용은 [빌더 설정](https://github.com/rome-protocol/canton-zk-evm/blob/v0.1.0/builder/README.md#settings).

## 게스트 키 재현

빌드 스크립트는 고정된 빌드 폴더 하나를 사용하며, 빌드 경로가 남아 있는 ELF는 거부합니다. 각 빌드가 공유 폴더를 비우므로 게스트 빌드는 한 번에 하나씩 실행하세요.

2026-10-04에 한 사용자가 한 컴퓨터에서 새로 체크아웃한 두 개를 차례로 빌드한 결과, 동일한 ELF와 programVK가 생성되었습니다. 빌드에는 각각 133초와 126초가 걸렸습니다. 다른 사용자나 다른 컴퓨터에서 빌드를 재현하려면 생성된 programVK가 기록된 값과 일치하는지 확인하세요. `network/up.sh` 빌드의 고정값이 다르면 중단합니다.  [게스트 README](https://github.com/rome-protocol/canton-zk-evm/blob/v0.1.0/guest/README.md#building) 에 빌드 방법과 제한 사항이 설명되어 있습니다.

## 증명 출력

와이어 형식의 크기는 1,344바이트입니다. PLONK 증명 768바이트, programVK 32바이트, rootC 32바이트, 공개 값 512바이트로 구성됩니다. `prove-one.sh` 는 16진수 형식과 다음 명령이 생성한 JSON을 기록합니다. `cargo-zisk-dev export-solidity-calldata`.


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.rome.builders/ko/canton-zk-evm/prover-host.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
