> For the complete documentation index, see [llms.txt](https://docs.rome.builders/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.rome.builders/ko/resources/faucets.md).

# 수전

Rome 및 브리지가 지원하는 모든 체인의 테스트 토큰 수도꼭지.

Hadrian은 테스트 USDC를 사용합니다; **Rubicon 메인넷은 실제 USDC를 사용합니다** — 그것을 가져오려면 [Rome Bridge](https://bridge-api.mainnet.romeprotocol.xyz/) (참조 [Rubicon](https://docs.rome.builders/ko/networks/rubicon.md)), 파우셋은 없습니다. 아래의 파우셋은 테스트 체인용입니다. Canton의 ZK EVM인 Ostia DevNet은 자체 테스트 코인과 파우셋이 있습니다; 참조 [Ostia DevNet (tROME)](#ostia-devnet-trome).

## Rome 지갑에 자금을 넣기

Rubicon과 Hadrian에서는 가스 토큰이 **USDC** (Circle) — **Rome 파우셋이 없습니다** 그들에는 없습니다. 지갑에 자금을 넣으려면 **USDC를 Rome으로 브리징합니다**. Hadrian에서는 EVM 테스트넷이나 Solana Devnet처럼 USDC를 구할 수 있는 체인의 테스트 USDC입니다. Rubicon에서는 위에서처럼 실제 USDC입니다. 이것이 유일한 수동 단계입니다; 그다음에는 일반적으로 배포하고 거래하세요. 아래 출처를 사용해 USDC를 구해 브리징하세요.

## Solana Devnet에서

Solana 지갑으로 작업하는 테스터는 Solana Devnet에서 두 가지가 필요하며, 둘 다 파우셋에서 받습니다:

* **Devnet USDC** Hadrian의 경우:  [Circle 파우셋](https://faucet.circle.com/), 네트워크를 Solana Devnet으로 설정하세요. Hadrian은 민트 `4zMMC9srt5Ri5X14GAgXhaHii3GnPAEERYPJgZJDncDU`, 따라서 이것은 체인이 가스 토큰으로 사용하는 것과 동일한 USDC입니다.
* **Devnet SOL** Solana 거래 수수료용:  [Solana 파우셋](https://faucet.solana.com/). SOL은 가스 토큰이 아닙니다; Hadrian은 USDC로 가스 요금을 부과합니다.

다음에 할 일은 무엇을 테스트하는지에 따라 다릅니다.

* **Solana 지갑에서 계약을 호출하기(Solana 경로).** USDC와 SOL은 그 Solana 지갑에 그대로 남습니다. 앱의 자금 단계는 필요할 때 USDC를 호출에 넣어주므로, 브리징할 것은 없습니다. 참조 [Solana 사용자에게 계약을 공개하기](https://docs.rome.builders/ko/developer-guides/open-to-solana-users.md).
* **Solana에서 EVM 지갑에 자금 넣기.** USDC를 [Rome Bridge](https://docs.rome.builders/ko/rome-1/bridge-api.md) 의 Solana 경로를 사용하여 EVM 지갑 주소를 수신자로 지정해 브리징하세요. 그러면 브리지는 그 EVM 지갑에 Rome에서 클레임 트랜잭션에 서명하도록 요청하며, 그 과정에서 USDC가 가스로 전환됩니다. 실시간 경로는 [`/v1/routes`](https://bridge-api.devnet.romeprotocol.xyz/v1/routes).

## 다른 체인에서 브리징하기

탐색기 [Rome Bridge](https://docs.rome.builders/ko/rome-1/bridge-api.md) 이동 **USDC** (CCTP를 통해) 그리고 **ETH** (Wormhole을 통해) 7개의 EVM 소스 체인에서 Rome으로, 그리고 위의 Solana Devnet에서 USDC와 SOL을 옮깁니다. 먼저 소스 체인에 자금을 넣은 다음 브리징하세요.

### USDC — 모든 소스 체인

탐색기 [Circle 파우셋](https://faucet.circle.com/) 모든 CCTP 소스 체인에서 테스트 USDC를 민트합니다 — 파우셋에서 체인을 선택하세요.

### 네이티브 가스 — 소스 체인별

소스 체인의 자체 브리지 트랜잭션 수수료를 지불하려면 소스 체인의 네이티브 토큰도 필요합니다:

| 소스 체인            | 체인 ID    | 네이티브 | 파우셋                                                                                   |
| ---------------- | -------- | ---- | ------------------------------------------------------------------------------------- |
| Ethereum Sepolia | 11155111 | ETH  | [Google Cloud 파우셋](https://cloud.google.com/application/web3/faucet/ethereum/sepolia) |
| Arbitrum Sepolia | 421614   | ETH  | [Alchemy 파우셋](https://www.alchemy.com/faucets/arbitrum-sepolia)                       |
| Base Sepolia     | 84532    | ETH  | [Alchemy 파우셋](https://www.alchemy.com/faucets/base-sepolia)                           |
| Polygon Amoy     | 80002    | POL  | [Polygon 파우셋](https://faucet.polygon.technology/)                                     |
| Avalanche Fuji   | 43113    | AVAX | [Avalanche 파우셋](https://faucet.avax.network/)                                         |
| Monad 테스트넷       | 10143    | MON  | [Monad 파우셋](https://faucet.monad.xyz/)                                                |
| OP Sepolia       | 11155420 | ETH  | [Alchemy 파우셋](https://www.alchemy.com/faucets/optimism-sepolia)                       |

Wormhole을 통해 브리징되는 ETH는 Ethereum Sepolia에서 옵니다(위의 Sepolia ETH 파우셋을 사용하세요). 이는 제3자 파우셋이며, 속도 제한이 있거나 변경될 수 있습니다.

## Ostia DevNet (tROME)

Ostia DevNet은 가치가 없는 테스트 코인인 tROME으로 가스를 지불합니다. 탐색기에는 파우셋이 있으며, [ostia.devnet.romeprotocol.xyz/faucet](https://ostia.devnet.romeprotocol.xyz/faucet), 그리고 같은 파우셋이 응답합니다 `POST /api/faucet` 와 `{"address": "0x..."}`.

* 모든 사람에게, 주소당 24시간마다 1 tROME.
* GitHub로 로그인한 빌더에게는 GitHub 계정과 각 주소마다 7일에 한 번씩 100 tROME를 제공합니다. 참조 [빌더 보조금](https://docs.rome.builders/ko/canton-zk-evm/devnet.md#the-builder-grant).
* 클라이언트 IP 주소당 10분에 한 번의 요청.
* 모든 사람을 합쳐 시간당 총 5,000건의 지급.

탐색기의 [Bridge](https://docs.rome.builders/ko/canton-zk-evm/bridge.md) 페이지에서는 또한 거기서 개설한 Canton 계정에 하루 20개의 테스트 Canton Coin도 제공합니다(DevNet 전용).

지급은 큐에 들어가 다음 배치로 전송되며, 한 번에 최대 100개까지 처리됩니다. 해당 블록이 Canton에서 최종 확정되면 도착합니다. 2026-10-25 01:34 UTC까지의 24시간 동안, 트랜잭션 수락부터 해당 블록이 최종 확정되기까지의 중앙값 시간은 19.2초였습니다. 참조 [Ostia DevNet](https://docs.rome.builders/ko/canton-zk-evm/devnet.md) 네트워크 세부정보는

## 다음은 무엇인가

* [네트워크](https://docs.rome.builders/ko/networks/networks.md) — Rubicon, Hadrian 또는 Ostia DevNet에 연결
* [Rome Bridge](https://docs.rome.builders/ko/rome-1/bridge-api.md) — 브리지와 그 API


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.rome.builders/ko/resources/faucets.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
