> For the complete documentation index, see [llms.txt](https://docs.rome.builders/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.rome.builders/vi/tai-nguyen/faucets.md).

# Faucets

Các faucet token thử nghiệm cho Rome và mọi chuỗi mà cầu nối hỗ trợ.

Hadrian dùng USDC thử nghiệm; **Mạng chính Rubicon dùng USDC thật** — hãy nạp nó vào bằng [Cầu Rome](https://bridge-api.mainnet.romeprotocol.xyz/) (xem [Rubicon](https://docs.rome.builders/vi/mang/rubicon.md)), không có faucet. Các faucet bên dưới dành cho các chuỗi thử nghiệm. Ostia DevNet, ZK EVM trên Canton, có đồng thử nghiệm và faucet riêng; xem [Ostia DevNet (tROME)](#ostia-devnet-trome).

## Nạp tiền vào ví Rome

Trên Rubicon và Hadrian, token gas là **USDC** (Circle) — không có **faucet Rome nào** cho chúng. Bạn nạp tiền vào ví bằng cách **chuyển USDC vào Rome**. Trên Hadrian, đó là USDC thử nghiệm từ một chuỗi mà bạn có thể lấy được: một testnet EVM hoặc Solana Devnet. Trên Rubicon, đó là USDC thật, như trên. Đó là bước thủ công duy nhất; sau đó, triển khai và giao dịch bình thường. Hãy lấy USDC và chuyển nó vào bằng các nguồn bên dưới.

## Từ Solana Devnet

Một người kiểm thử làm việc từ ví Solana cần hai thứ trên Solana Devnet, cả hai đều từ faucet:

* **USDC Devnet** cho Hadrian: [faucet Circle](https://faucet.circle.com/), với mạng được đặt là Solana Devnet. Hadrian dùng mint `4zMMC9srt5Ri5X14GAgXhaHii3GnPAEERYPJgZJDncDU`, nên đây chính là USDC mà chuỗi dùng làm token gas.
* **SOL Devnet** cho phí giao dịch Solana: [faucet Solana](https://faucet.solana.com/). SOL không phải token gas; Hadrian tính phí gas bằng USDC.

Bước tiếp theo bạn làm phụ thuộc vào thứ bạn đang kiểm thử.

* **Gọi hợp đồng từ ví Solana (luồng Solana).** USDC và SOL vẫn ở trong ví Solana đó. Bước nạp tiền của ứng dụng sẽ đưa USDC vào lệnh gọi khi cần, nên không có gì để chuyển cầu. Xem [Mở hợp đồng của bạn cho người dùng Solana](https://docs.rome.builders/vi/huong-dan-cho-nha-phat-trien/open-to-solana-users.md).
* **Nạp tiền cho ví EVM từ Solana.** Chuyển cầu USDC bằng [Cầu Rome](https://docs.rome.builders/vi/ung-dung-tren-rome/bridge-api.md) bằng đường Solana của nó, với địa chỉ ví EVM làm người nhận. Sau đó bridge sẽ yêu cầu ví EVM đó ký một giao dịch nhận trên Rome, biến USDC thành gas. Các tuyến trực tiếp nằm tại [`/v1/routes`](https://bridge-api.devnet.romeprotocol.xyz/v1/routes).

## Chuyển vào từ một chuỗi khác

Tệp [Cầu Rome](https://docs.rome.builders/vi/ung-dung-tren-rome/bridge-api.md) chuyển **USDC** (qua CCTP) và **ETH** (qua Wormhole) vào Rome từ bảy chuỗi nguồn EVM, và USDC cùng SOL từ Solana Devnet (ở trên). Hãy nạp tiền cho chuỗi nguồn trước, rồi mới chuyển cầu.

### USDC — tất cả các chuỗi nguồn

Tệp [faucet Circle](https://faucet.circle.com/) đúc USDC thử nghiệm trên mọi chuỗi nguồn CCTP — hãy chọn chuỗi trong faucet.

### Gas gốc — theo từng chuỗi nguồn

Bạn cũng cần token gốc của chuỗi nguồn để trả phí cho chính giao dịch chuyển cầu của nó:

| Chuỗi nguồn      | Chain ID | Gốc  | Faucet                                                                                   |
| ---------------- | -------- | ---- | ---------------------------------------------------------------------------------------- |
| Ethereum Sepolia | 11155111 | ETH  | [faucet Google Cloud](https://cloud.google.com/application/web3/faucet/ethereum/sepolia) |
| Arbitrum Sepolia | 421614   | ETH  | [faucet Alchemy](https://www.alchemy.com/faucets/arbitrum-sepolia)                       |
| Base Sepolia     | 84532    | ETH  | [faucet Alchemy](https://www.alchemy.com/faucets/base-sepolia)                           |
| Polygon Amoy     | 80002    | POL  | [faucet Polygon](https://faucet.polygon.technology/)                                     |
| Avalanche Fuji   | 43113    | AVAX | [faucet Avalanche](https://faucet.avax.network/)                                         |
| Monad Testnet    | 10143    | MON  | [faucet Monad](https://faucet.monad.xyz/)                                                |
| OP Sepolia       | 11155420 | ETH  | [faucet Alchemy](https://www.alchemy.com/faucets/optimism-sepolia)                       |

ETH được chuyển cầu qua Wormhole đến từ Ethereum Sepolia (dùng faucet ETH Sepolia ở trên). Đây là các faucet của bên thứ ba và có thể giới hạn tốc độ hoặc thay đổi.

## Ostia DevNet (tROME)

Ostia DevNet trả gas bằng tROME, một đồng thử nghiệm không có giá trị. Trình khám phá có một faucet, tại [ostia.devnet.romeprotocol.xyz/faucet](https://ostia.devnet.romeprotocol.xyz/faucet), và cùng faucet đó hỗ trợ `POST /api/faucet` với `{"address": "0x..."}`.

* 1 tROME cho mỗi địa chỉ mỗi 24 giờ, cho tất cả mọi người.
* 100 tROME cho nhà xây dựng đăng nhập bằng GitHub, mỗi 7 ngày một lần cho mỗi tài khoản GitHub và mỗi địa chỉ. Xem [khoản cấp cho builder](https://docs.rome.builders/vi/canton-zk-evm/devnet.md#the-builder-grant).
* Mỗi địa chỉ IP khách hàng một yêu cầu mỗi 10 phút.
* Tổng cộng 5.000 khoản chi trả mỗi giờ, từ tất cả mọi người.

Trang [Bridge](https://docs.rome.builders/vi/canton-zk-evm/bridge.md) trang cũng cấp 20 Canton Coin thử nghiệm mỗi ngày cho một tài khoản Canton bạn mở ở đó (chỉ DevNet).

Một khoản chi trả sẽ vào hàng đợi và được gửi trong lô tiếp theo, tối đa 100 khoản mỗi lần. Nó đến khi khối đó được chốt cuối trên Canton. Trong 24 giờ tính đến 2026-10-25 01:34 UTC, thời gian trung vị từ lúc chấp nhận một giao dịch đến khi khối của nó được chốt cuối là 19,2 giây. Xem [Ostia DevNet](https://docs.rome.builders/vi/canton-zk-evm/devnet.md) để biết chi tiết mạng.

## Tiếp theo là gì

* [Các mạng](https://docs.rome.builders/vi/mang/networks.md) — kết nối tới Rubicon, Hadrian hoặc Ostia DevNet
* [Cầu Rome](https://docs.rome.builders/vi/ung-dung-tren-rome/bridge-api.md) — bridge và API của nó


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.rome.builders/vi/tai-nguyen/faucets.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
