> For the complete documentation index, see [llms.txt](https://docs.rome.builders/llms.txt). Markdown versions of documentation pages are available by appending `.md` to page URLs; this page is available as [Markdown](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate.md).

# Solgate

Solgate — Polygon AggLayer 上连接 Solana 与其他链的桥接页面。可在 Solana 钱包与 Ethereum、X Layer、Katana 及其他 AggLayer 链之间双向转移代币。

Solgate 是 Rome 在 Polygon AggLayer 上的桥接页面，可双向转移 Solana 钱包与 AggLayer EVM 链之间的代币。来自 EVM 链的代币会以真正的 SPL 代币形式到达 Solana 钱包；来自 Solana 的代币则会以 ERC-20 形式到达 EVM 链。Solana 与另一条链属于同一个市场。

Solgate 已在主网和测试网上线。

| 网络  | 应用                                                                           | Rome 链                                                       | 已连接的链                                       |
| --- | ---------------------------------------------------------------------------- | ------------------------------------------------------------ | ------------------------------------------- |
| 主网  | [solgate.romeprotocol.xyz](https://solgate.romeprotocol.xyz)                 | [Rubicon](https://docs.rome.builders/zh/wang-luo/rubicon.md) | Ethereum、X Layer、Katana                     |
| 测试网 | [solgate.testnet.romeprotocol.xyz](https://solgate.testnet.romeprotocol.xyz) | [Hadrian](https://docs.rome.builders/zh/wang-luo/hadrian.md) | Ethereum Sepolia、Katana Bokuto、Billions 测试网 |

## 代币如何转移

```
从 EVM 链到 Solana
  链上的代币 ──► 在 AggLayer 上完成结算 ──► 领取 ──► Solana 钱包中的 SPL 代币

从 Solana 到 EVM 链
  Solana 钱包中的 SPL 代币 ──► 发送 ──► 在 AggLayer 上完成结算 ──► 领取 ──► 链上的 ERC-20
```

在 Solana 侧，Solgate 使用 Rome 链，该链运行于 Solana 内。应用的链列表中，主网上将其列为 Rome Rubicon，测试网上则列为 Rome Hadrian。

* **从 EVM 链转到 Solana。** 转账会在 AggLayer 上完成结算。随后，资产会在“领取”状态下等待；领取后，通常只需一次授权，资产便会进入你的 Solana 钱包。
* **从 Solana 转到 EVM 链。** 从你的 Solana 钱包发起转账。转账会在 AggLayer 上完成结算，然后在“领取”状态下等待。你可以使用 EVM 钱包在目标链上领取。
* **在其他链上创建的代币，必须先支持桥接到 Solana。** 主网上由 Rome 列出代币；测试网上任何人都可以列出。请参阅 [代币](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate/tokens.md).

## 链与耗时

Solana · via Rome 是 Solana 侧。实时列表见 `GET /v1/chains` 应用地址： [主网](https://solgate.romeprotocol.xyz/v1/chains) · [测试网](https://solgate.testnet.romeprotocol.xyz/v1/chains).

| 链（主网）    | 转至 Solana 所需时间 | 从 Solana 转出所需时间 |
| -------- | -------------- | --------------- |
| Ethereum | 约 120 秒        | 约 6 分钟          |
| X Layer  | 暂无预估           | 约 18 分钟         |
| Katana   | 约 65 分钟        | 约 4 分钟          |

| 链（测试网）        | 转至 Solana 所需时间 | 从 Solana 转出所需时间 |
| ------------- | -------------- | --------------- |
| 以太坊 Sepolia   | 约 130 秒        | 约 5 分钟          |
| Katana Bokuto | 约 39 分钟        | 约 8 分钟          |
| Billions 测试网  | 暂无预估           | 暂无预估            |

转账会等待源链在 AggLayer 上的下一次更新，因此所示时间为典型值，并会随各链的更新计划而变化。如果某条链显示“无法估算”，应用不会显示倒计时。

从 Ethereum 发送到 Rome 链上 EVM 钱包的 ETH，只要金额高于较低的最低限额，就会自动到账，主网和测试网均适用。请参阅 [自动领取](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate/using.md#auto-claim).

## 这些页面

* [**使用 Solgate**](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate/using.md) ——连接、发送、领取、“代币”选项卡、“活动”筛选条件、“已到账”卡片、钱包、费用和时间。
* [**代币**](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate/tokens.md) ——哪些代币可以转移、代币如何命名、由发行方自有桥接器转移的代币，以及无法转移的代币。
* [**在 Solgate 上构建**](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate/builders.md) ——哪些资产可以跨链转移、如何让你的代币支持向 Solana 转移、“已验证”和“未验证”、“添加到钱包”，以及公共 API。
* [**在 Solgate 上进行消息传递**](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate/messaging.md) ——目前尚未在主网上提供。
* [**Solgate 创意**](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate/ideas.md) ——十个值得构建的项目。
* [**在 Solgate 上构建**](https://docs.rome.builders/zh/rome-xue-yuan/13-build-on-solgate.md) ——全面讲解整个流程的 Academy 课程。
* [**常见问题解答**](https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate/faq.md)

由 Rome 提供支持。


---

# Agent Instructions
This documentation is published with GitBook. GitBook is the documentation platform designed so that both humans and AI agents can read, navigate, and reason over technical content effectively. Learn more at gitbook.com.

## Querying This Documentation
If you need additional information that is not directly available in this page, you can query the documentation by asking a question.

Perform an HTTP GET request on the following URL with the `ask` and `goal` query parameters:

```
GET https://docs.rome.builders/zh/rome-shang-de-ying-yong/solgate.md?ask=<question>&goal=<user_goal>
```

`ask` is the immediate question: it should be specific, self-contained, and written in natural language.
`goal` is what the user is ultimately trying to achieve, the reason they need the answer. Sharing it helps GitBook give you a better, more relevant answer. A goal is most helpful when it describes the outcome the user wants rather than restating the question. For example, with `ask=how do I create an API token`, a goal like `automate deployments from our CI pipeline` lets GitBook tailor the answer to that use case.

The response will contain a direct answer to the question and relevant excerpts and sources from the documentation.

Use this mechanism when the answer is not explicitly present in the current page, you need clarification or additional context, or you want to retrieve related documentation sections.
